CNP PUMP CHL2-30 (220V)

0.37kW, 220V, Rated Flow 2 m³/h, Rated Head 22 m, Eta 41 %
Wet parts : Stainless 304

ปั๊มน้ำทรงนอนหลายใบพัด CNP ซีรี่ย์ CHL/CHLF

Non-self-priming horizontal multistage centrifugal pump, impeller guide vane is made of stainless steel plate stamping and welding, with long shaft motor, axial inlet and radial outlet.
Compact structure; Low noise; Suitable for mildly corrosive liquids; Small installation space.

Application

CHL, CHLK and CHLF(T) type pump are mainly used in industrial field;

• Air-conditioning system
• Cooling system
• Industrial cleaning
• Water treatment (Water purification)
• Aquiculture
• Fertilizing / metering system
• Environmental application

Applicable medium

• Thin and clean non-flammable and non-explosive liquid without solid granules and fibers.
• Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
• When the density or viscosity of to-be-conveyed liquid is larger than that of water, it is necessary to select a driving motor of high power.
• Whether a specific liquid is suitable for the pump depends on many factors, among which the most important ones are chlorine content, PH value, temperature, solvent and oil content.

Pump

• Horizontal multistage non-self-priming centrifugal pump, attached with long shaft electric motor.
• Compact structure renders small size of pump; axial inlet and radial outlet.

Curve conditions

Following conditions are suitable for the performance curves shown above.

• All curves are based on the measured values of 50Hz: constant motor speed 2900r/min,60 Hz: constant motor speed 3500 r/min;
• Curve tolerance in conformity to ISO9906:2012 Grade 3B.
• Measurement is done with 20°C air-free water, Cin- ematic viscosity of 1 mm2/sec.
• The operation of pump shall refer to the performance region described by the thickened curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.

Operation conditions

• Liquid temperature:
  Normal temperature type: -15°C ~ +70°C
  Hot water type: -15°C ~ +105°C
• Ambient temperature: up to +40°C
• Max.operation pressure: 10 bar
• Max.inlet pressure is limited by max. Operation pressure

START UP & MAINTENANCE (CLICK!)

CNP PUMP CHL2-30 (220V)