5.5kW, 380V, Rated Flow 10 m³/h, Rated Head 116 m, Eta 72 %
Inlet/Outlet : Cast Iron
START UP & MAINTENANCE (CLICK)
*ราคาสินค้ายังไม่รวมภาษีมูลค่าเพิ่ม 7%
฿34,700.00
Pick up from the Woodmart Store
To pick up today
Free
Courier delivery
Our courier will deliver to the specified address
2-3 Days
Free
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
Free
Warranty 1 year
Free 30-Day returns
CNP PUMP CDM10-13 (380V)
5.5kW, 380V, Rated Flow 10 m³/h, Rated Head 116 m, Eta 72 %
Inlet/Outlet : Cast Iron
CDM/CDMF CNP pumps are new generation, high efficiency. It is energy saving, low noise and high reliability
CDM/CDMF เป็นปั๊มตั้ง รุ่นใหม่ของ CNP ที่มีประสิทธิภาพสูง ประหยัดพลังงาน และมีเสียงรบกวนต่ำ ปั๊มน้ำมีความทนทาน
CDM/CDMF pumps are new generation, high efficiency, non-self-priming vertical multistage centrifugal pumps (Abbr. as pumps). It referred European standard, used entirely new industrial design. It is energy saving, low noise, environment friendly, compact design, beautiful shape, light, easy for service, high reliability.
Working conditions
Thin, clean, non-flammable, non-explosive, solid
free, fiber free, physically and chemically water-like
liquid.
Liquid temperature:
Normal temperature type: -15℃ to 70℃
Hot water type:-15℃ to 120℃
Ambient temperature:up to +40℃
Altitude: up to 1000m
Application
CDM/CDMF pumps are designed for a variety of
applications from the pumping of potable water to
the pumping of industrial liquids. Applied for liquids
of different temperature, different rated flow, different
pressure range. CDM is suitable for non-corrosive
liquid, CDMF is suitable for light corrosive liquid.
Boosting: Filtering and transferring water in water
factories, delivering water in different zone, pressuring
for major pipelines, boosting for high buildings.
Pressuring: Water circulating system, washing
system, high pressure flushing system, fire-fighting
system.
HVAC: Air condition system
Water treatment: Ultrafiltration system, R/O system,
distillation system, separator, swimming pool.
Performance curve
Following conditions are suitable for performance
curve below.
1.All curves are based on the measured values of
50Hz;constant motor speed 2900rpm or 2950rpm.
2.Curve tolerance in conformity with ISO9906:2012,
Grade 3B.
3.Measurement is done with 20℃ air-free water,
kinematic viscosity of 1mm2/sec.
4.The operation of pump shall refer to the
performance region indicated by the thickened curve
to prevent overheating due to too small flow rate or
overload of motor due to too large flow rate.
CNP PUMP CDM10-13 (380V)
